Leaving rear caliper off until chain finally made 'endless'
A good quality but Cheap (ebay) o-ring chain and sprocket kit. Regina chain, and JT cogs. For a GPX 600 (15 and 39 teeth) but fits perfectly. Have a JT 13 tooth on the front so overall ratio is down from 3.2:1 to 3:1.. should be close enough and will allow for lower revs at high speed.
Dont even mention airbox rubbers to me !.....how to waste 2 hours.. damn Mr kawasaki.
Frame bolt heads and threads wire brushed
Linkage loosely back together.. waiting to get chain made 'endless' before final build here...
Linkage loosely back together.. waiting to get chain made 'endless' before final build here...Note GPZ 500 shock..
No comments:
Post a Comment